Thuis
>
producten
>
De Rol van het roestvrij staalblad
>
|
|
| Plaats van herkomst | Jiangsu |
| Merknaam | TISCO |
| Certificering | SGS ISO ROHS |
| Modelnummer | ASTM 316LVM |
ASTM AISI JIS 403 410 430 roestvrij staal spoel warm/koud gewalst voor decoratie
|
|
|
Normale grootte
| Dikte (mm) | Breedte ((mm) | |||||
| 600-999 | 1000 | 1200 | 1219 | 1250 | 1500 | |
| 0.12-0.19 | √ | √ | √ | √ | √ | |
| 0.20-0.29 | √ | √ | √ | √ | √ | |
| 0.30-0.39 | √ | √ | √ | √ | √ | |
| 0.40-0.49 | √ | √ | √ | √ | √ | |
| 0.50-0.59 | √ | √ | √ | √ | √ | |
| 0.60-0.69 | √ | √ | √ | √ | √ | |
| 0.70-0.79 | √ | √ | √ | √ | √ | |
| 0.80-0.89 | √ | √ | √ | √ | √ | |
| 0.90-0.99 | √ | √ | √ | √ | √ | |
| 1.00-1.20 | √ | √ | √ | √ | √ | |
| Productnaam | Roestvrij staal spoel / band / platen |
| Standaard | AISI, ASTM, DIN, JIS, GB, JIS, SUS, EN, enz. |
| Materiaal |
201, 202, 301, 302, 303, 304, 304L, 304H, 310S, 316, 316L, 317L, 321, 310S, 309S, 410, 410S,420, 430, 431, 440A, 904L, 2205, 2507, enz. |
| Dikte ((mm) | koudgewalst:0.25mm-3.0mm Warmgewalst: 3.0mm-180mm Zoals u wenst |
| Breedte ((mm) | warmgewalste regelmatige breedte:1500,1800,2000, Als Your RequestCold de normale breedte rolde:1000,1219,1250,1500Zoals u wenst. |
| Techniek | Warm gewalst / koud gewalst |
| Lange | 1-12m of op uw verzoek |
| Oppervlakte | 2B,BA ((helder gegalveerd) NO.1 NO.2 NO.3 NO.4, 2D, 4K, 6K, 8K HL ((Hair Line), SB, Embossed, op uw verzoek |
| Toepassing |
Meubelen, deuren, keukenapparatuur, bouwmateriaal, commercieel gebruik, bouwwerk, dakbedekking, gegolfd Daken, huishoudelijke apparaten, industrie, auto-onderdelen, koelkamers, enz. |
| Verpakking | Standaard zeewaardig verpakken / op uw verzoek |
| Internationale certificeringsmethode: | ISO SGS BV CE |
| Grafiek van de chemische samenstelling van roestvrij staal, percentage (%) | ||||||||||
|---|---|---|---|---|---|---|---|---|---|---|
| Roestvrij staal | C, ≤ | Mn, ≤ | P, ≤ | S, ≤ | Si, ≤ | Cr | Ni | Mo. | N, ≤ | Andere elementen, ≤ |
| 304 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | – | – | – |
| 304L | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 8.0-12.0 | – | – | – |
| 316 | 0.08 | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | – | – |
| 316L | 0.03 | 2.00 | 0.045 | 0.030 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | – | – |
| 321 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | – | 0.10 | ≥ Ti 5×(C+N), ≤ 0.70 |
| 201 | 0.15 | 5.50-7.50 | 0.06 | 0.03 | 1.00 | 16.0-18.0 | 3.5-5.5 | – | 0.25 | – |
| 202 | 0.15 | 7.50-10.00 | 0.06 | 0.03 | 1.00 | 17.0-19.0 | 4.0-6.0 | – | 0.25 | – |
| 205 | 0.12-0.25 | 14.0-15.5 | 0.06 | 0.03 | 1.00 | 16.5-18.0 | 1.0-1.7 | – | 0.32-0.40 | – |
| 301 | 0.15 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 6.0-8.0 | – | 0.10 | – |
| 301L | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 6.0-8.0 | – | 0.20 | – |
| 301LN | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 6.0-8.0 | – | 0.07-0.20 | – |
| 302 | 0.15 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-19.0 | 8.0-10.0 | – | 0.10 | – |
| 302B | 0.15 | 2.00 | 0.045 | 0.03 | 2.00-3.00 | 17.0-19.0 | 8.0-10.0 | – | 0.10 | – |
| 303 | 0.15 | 2.00 | 0.2 | ≥ 0.15 | 1.00 | 17.0-19.0 | 8.0-10.0 | – | – | – |
| 303Se | 0.15 | 2.00 | 0.2 | 0.06 | 1.00 | 17.0-19.0 | 8.0-10.0 | – | – | Zeven.15 |
| 304H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 8.0-10.5 | – | – | – |
| 304N | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | – | 0.10-0.16 | – |
| 304LN | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 8.0-11.0 | – | 0.10-0.16 | – |
| 305 | 0.12 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 11.0-13.0 | – | – | – |
| 308 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 19.0-21.0 | 10.0-12.0 | – | – | – |
| 309 | 0.2 | 2.00 | 0.045 | 0.03 | 1.00 | 22.0-24.0 | 12.0-15.0 | – | – | – |
| 309S | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 22.0-24.0 | 12.0-15.0 | – | – | – |
| 309H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 22.0-24.0 | 12.0-15.0 | – | – | – |
| 309Cb | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 22.0-24.0 | 12.0-16.0 | – | – | ≥ Cb 10 x C, ≤1.10 |
| 309HCb | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 22.0-24.0 | 12.0-16.0 | – | – | ≥ Cb 10 x C, ≤1.10 |
| 310 | 0.25 | 2.00 | 0.045 | 0.03 | 1.5 | 24.0-26.0 | 19.0-22.0 | – | – | – |
| 310S | 0.08 | 2.00 | 0.045 | 0.03 | 1.5 | 24.0-26.0 | 19.0-22.0 | – | – | – |
| 310H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 24.0-26.0 | 19.0-22.0 | – | – | – |
| 310Cb | 0.08 | 2.00 | 0.045 | 0.03 | 1.5 | 24.0-26.0 | 19.0-22.0 | – | – | ≥ Cb 10 x C, ≤ 1.10 |
| 310 miljoen NLG | 0.02 | 2.00 | 0.03 | 0.01 | 0.5 | 24.0-26.0 | 20.5-23.5 | 1.60-2.60 | 0.09-0.15 | – |
| 314 | 0.25 | 2.00 | 0.045 | 0.03 | 1.50-3.00 | 23.0-26.0 | 19.0-22.0 | – | – | – |
| 316H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | – | – |
| 316Ti | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | 0.1 | ≥ Ti 5 × (C + N), ≤0.70 |
| 316Cb | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | 0.1 | ≥ Cb 10 × C, ≤ 1.10 |
| 316N | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-14.0 | 2.00-3.00 | 0.10-0.16 | – |
| 316LN | 0.03 | 2.00 | 0.045 | 0.03 | 1.00 | 16.0-18.0 | 10.0-13.0 | 2.00-3.00 | 0.10-0.16 | – |
| 317 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | 0.1 | – |
| 317L | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | 0.1 | – |
| 317LM | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 13.5-17.5 | 4.0-5.0 | 0.2 | – |
| 317LMN | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-20.0 | 13.5-17.5 | 4.0-5.0 | 0.10-0.20 | – |
| 317LN | 0.03 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 11.0-15.0 | 3.0-4.0 | 0.10-0.22 | – |
| 321 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | – | 0.1 | ≥ Ti 5 × (C + N), ≤ 0.70 |
| 321H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-19.0 | 9.0-12.0 | – | – | ≥ Ti 4 × (C + N), ≤ 0.70 |
| 334 | 0.08 | 1.00 | 0.03 | 0.015 | 1.00 | 18.0-20.0 | 19.0-21.0 | – | – | Al 0.15-0.60Ti 0,15-0.60 |
| 347 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | – | – | ≥ Cb 10 × C, ≤ 1.00 |
| 347H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-19.0 | 9.0-13.0 | – | – | ≥ Cb 8 × C, ≤ 1.00 |
| 347LN | 0.005-0.020 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-13.0 | – | 0.06-0.10 | Cb 0,20-0.50, 15 × C ≥ |
| 348 | 0.08 | 2.00 | 0.045 | 0.03 | 1.00 | 17.0-19.0 | 9.0-12.0 | – | – | Cb 10 × C-1.10- Dat is geen probleem.10Co 0.20 |
| 348H | 0.04-0.10 | 2.00 | 0.045 | 0.03 | 0.75 | 17.0-19.0 | 9.0-13.0 | – | – | (Cb + Ta) 8 × C ≥, 1,00 ≤, Ta 0.10Co 0.20 |
| 2205 | 0.03 | 2.00 | 0.03 | 0.02 | 1.00 | 22.0-23.0 | 4.5-6.5 | 3.0-3.5 | 0.14-0.20 | – |
| 2304 | 0.03 | 2.5 | 0.04 | 0.03 | 1.00 | 21.5-24.5 | 3.0-5.5 | 0.05-0.60 | 0.05-0.60 | – |
| 255 | 0.04 | 1.5 | 0.04 | 0.03 | 1.00 | 24.0-27.0 | 4.5-6.5 | 2.9-3.9 | 0.10-0.25 | Cu 1,50-2.50 |
| 2507 | 0.03 | 1.2 | 0.035 | 0.02 | 0.8 | 24.0-26.0 | 6.0-8.0 | 3.0-5.0 | 0.24-0.32 | Cu ≤ 0.50 |
| 329 | 0.08 | 1.00 | 0.04 | 0.03 | 0.75 | 23.0-28.0 | 2.0-5.00 | 1.00-2.00 | – | – |
| 403 | 0.15 | 1.00 | 0.04 | 0.03 | 0.5 | 11.5-13.0 | – | – | – | – |
| 405 | 0.08 | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-14.5 | ≤ 0.5 | – | – | Al 0.10-0.30 |
| 410 | 0.08-0.15 | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-13.5 | – | – | – | – |
| 410S | 0.08 | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-13.5 | ≤ 0.6 | – | – | – |
| 414 | 0.15 | 1.00 | 0.04 | 0.03 | 1.00 | 11.5-13.5 | 1.25-2.50 | – | – | – |
| 416 | 0.15 | 1.25 | 0.06 | ≥ 0.15 | 1.00 | 12.0-14.0 | – | – | – | – |
| 416Se | 0.15 | 1.25 | 0.06 | ≥ 0.06 | 1.00 | 12.0-14.0 | – | – | – | Zeven.15 |
| 420 | 0.15, ≥ | 1.00 | 0.04 | 0.03 | 1.00 | 12.0-14.0 | – | – | – | – |
| 420F | 0.30-0.40 | 1.25 | 0.06 | ≥ 0.15 | 1.00 | 12.0-14.0 | ≤ 0.5 | – | – | Cu 0.60 |
| 420FSe | 0.20-0.40 | 1.25 | 0.06 | 0.15 | 1.00 | 12.0-14.0 | ≤ 0.5 | – | – | Zeven.15- Cu 0.60 |
| 422 | 0.20-0.25 | 0.50-1.00 | 0.025 | 0.025 | 0.5 | 11.0-12.5 | 0.50-1.00 | 0.90-1.25 | – | V (0,20-0,30), W (0,90-1,25) |
| 429 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 14.0-16.0 | – | – | – | – |
| 430 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | – | – | – |
| 430F | 0.12 | 1.25 | 0.06 | ≥ 0.15 | 1.00 | 16.0-18.0 | – | – | – | – |
| 430FSe | 0.12 | 1.25 | 0.06 | 0.06 | 1.00 | 16.0-18.0 | – | – | – | Zeven.15 |
| 439 | 0.03 | 1.00 | 0.04 | 0.03 | 1.00 | 17.0-19.0 | ≤ 0.5 | – | 0.03 | ≥ Ti [0,20+4 ((C+N)) ], ≤ 1.10Al 0.15 |
| 431 | 0.2 | 1.00 | 0.04 | 0.03 | 1.00 | 15.0-17.0 | 1.25-2.50 | – | – | – |
| 434 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | 0.75-1.25 | – | |
| 436 | 0.12 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | 0.75-1.25 | – | ≥ Cb 5 × C, ≤ 0.80 |
| 440A | 0.60-0.75 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | ≤ 0.75 | – | – |
| 440B | 0.75-0.95 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | ≤ 0.75 | – | – |
| 440C | 0.95-1.20 | 1.00 | 0.04 | 0.03 | 1.00 | 16.0-18.0 | – | ≤ 0.75 | – | – |
| 440F | 0.95-1.20 | 1.25 | 0.06 | 0.15 | 1.00 | 16.0-18.0 | ≤ 0.5 | – | – | Cu ≤ 0.60 |
| 440FSe | 0.95-1.20 | 1.25 | 0.06 | 0.06 | 1.00 | 16.0-18.0 | ≤ 0.5 | – | – | Se ≤ 0.15; Cu ≤ 0.60 |
| 442 | 0.2 | 1.00 | 0.04 | 0.04 | 1.00 | 18.0-23.0 | ≤ 0.6 | – | – | |
| 444 | 0.025 | 1.00 | 0.04 | 0.03 | 1.00 | 17.5-19.5 | ≤ 1.00 | 1.75-2.50 | 0.035 | Ti+Cb 0,20+4 × (C+N) -0.80 |
| 446 | 0.2 | 1.5 | 0.04 | 0.03 | 1.00 | 23.0-27.0 | ≤ 0.75 | – | 0.25 | – |
| 800 | 0.1 | 1.5 | 0.045 | 0.015 | 1.00 | 19.0-23.0 | 30.0-35.0 | – | – | Cu 0.75; ≥ FeH 39.5Al 0,15-0.60 |
| 800H | 0.05-0.10 | 1.5 | 0.045 | 0.015 | 1.00 | 19.0-23.0 | 30.0-35.0 | – | – | Cu 0.75; ≥ FeH 39.5Al 0,15-0.60 |
| 904L | 0.02 | 2.00 | 0.045 | 0.035 | 1.00 | 19.0-23.0 | 23.0-28.0 | 4.00-5.00 | 0.1 | Cue 1.00-2.00 |
| legering 20 | 0.07 | 2.00 | 0.045 | 0.035 | 1.00 | 19.0-21.0 | 32.0-38.0 | 2.00-3.00 | – | Cu 3.0-4.0; ≥ Nb 8 × C; ≤1.00 |
| XM-1 | 0.08 | 5.0-6.5 | 0.04 | 0.18-0.35 | 1.00 | 16.00-18.0 | 5.0-6.5 | – | – | Cu 1,75-2.25 |
| XM-2 | 0.15 | 2.00 | 0.05 | 0.11-0.16 | 1.00 | 17.0-19.0 | 8.0-10.0 | 0.40-0.60 | – | Al 0,60-1.00 |
| XM-5 | 0.15 | 2.5-4.5 | 0.2 | ≥ 0.25 | 1.00 | 17.0-19.0 | 7.0-10.0 | – | – | – |
| XM-6 | 0.15 | 1.50-2.50 | 0.06 | ≥ 0.15 | 1.00 | 12.0-14.0 | – | – | – | – |
| XM-10 | 0.08 | 8.0-10.0 | 0.045 | 0.03 | 1.00 | 19.0-21.5 | 5.5-7.5 | – | 0.15-0.40 | – |
| XM-11 | 0.04 | 8.0-10.0 | 0.045 | 0.03 | 1.00 | 19.0-21.5 | 5.5-7.5 | – | 0.15-0.40 | – |
| XM-15 | 0.08 | 2.00 | 0.03 | 0.03 | 1.50-2.50 | 17.0-19.0 | 17.5-18.5 | – | – | – |
| XM-17 | 0.08 | 7.50-9.00 | 0.045 | 0.03 | 0.75 | 17.5-22.0 | 5.0-7.0 | 2.00-3.00 | 0.25-0.50 | – |
| XM-18 | 0.03 | 7.50-9.00 | 0.045 | 0.03 | 0.75 | 17.5-22.0 | 5.0-7.0 | 2.00-3.00 | 0.25-0.50 | – |
| XM-19 | 0.06 | 4.0-6.0 | 0.045 | 0.03 | 1.00 | 20.5-23.5 | 11.5-13.5 | 1.50-3.00 | 0.20-0.40 | Cb 0,10-0.30, V 0,10-0.30 |
| XM-21 | 0.08 | 2.00 | 0.045 | 0.03 | 0.75 | 18.0-20.0 | 8.0-10.5 | – | 0.16-0.30 | – |
| XM-27 | 0.01 | 0.4 | 0.02 | 0.02 | 0.4 | 25.0-27.5 | ≤ 0.5 | 0.75-1.50 | 0.015 | Cu 0.20Cb 0,05-0.20; (Ni + Cu) 0.50 |
| XM-33 | 0.06 | 0.75 | 0.04 | 0.02 | 0.75 | 25.0-27.0 | ≤ 0.5 | 0.75-1.50 | 0.04 | Cu 0.20Ti 0,20-1.00; ≥ Ti 7 ((C+N) |
| XM-34 | 0.08 | 2.5 | 0.04 | ≥ 0.15 | 1.00 | 17.5-19.5 | – | 1.50-2.50 | – | – |
| PH 13-8Mo | 0.05 | 0.2 | 0.01 | 0.008 | 0.1 | 12.25-13.25 | 7.5-8.5 | – | – | – |
| 15-5 pH | 0.07 | 1 | 0.04 | 0.03 | 1 | 14.0-15.5 | 3.5-5.5 | – | – | 20,5-4,5 Cu; 0,15-0,45 Nb |
| 17-4 PH | 0.07 | 1 | 0.04 | 0.03 | 1 | 15.5-17.5 | 3.0-5.0 | – | – | 3.0-5.0 Cu; 0,15-0,45 Nb |
| 17-7 PH | 0.09 | 1 | 0.04 | 0.04 | 1 | 16.0-18.0 | 6.5-7.75 | – | – | 0.75-1.5 Al |
Klant:
Feedback:
Vragen:
Hoe zit het met de MOQ?
In het algemeen zal de trail order worden geaccepteerd. De MOQ kan worden bevestigd volgens de verschillende producten. Bijvoorbeeld, de MOQ van PPGI zal 10MT zijn.
Hoe zit het met de levertijd?
Binnen 15-30 dagen na ontvangst van de storting of L / C op zicht. Natuurlijk zal de detail worden bevestigd door de hoeveelheid en de verschillende producten.
Hoe bestellen?
Stuur ons uw bestelling per e-mail. Of u kunt ons vragen om u een proforma factuur voor uw bestelling te sturen. We moeten de volgende informatie voor uw bestelling weten.
Wat zijn de verzendvoorwaarden?
1Containerschip 2. Bulkschip 3. Trein
Neem op elk moment contact met ons op.
